Wlan0 Shutdown

Device: NANO
Type: Bug
Status: Closed

After setting the Open AP, under networking tab, to channel 100 (5ghz) wlan0 and wlan0-1 disappear. It happened right after updating the AP. Also along with that, I still get the red led to flash as if wlan1mon is active but under PineAP it will not allow me to enable PineAP Daemon. I can Allow Associations, log probes and associations but not collect ssid or the others. I have rebooted also with the same results. No other module is running or set to start on boot.


2017/02/17 04:28
Im sorry this is meant for the Tetra not the Nano.

Add Comment:

Please log in to comment.