Cannot connect to WPA from "Client Mode"

Device: NANO
Type: Bug
Status: Closed

I have installed a wifi card at the usb port as wlan2. The card is a TL-WN722N

When I try to connect to a WPA2 or OPEN network the connection is succesful but not for WPA.

I noticed that inside the /etc/config/wireless the wlan2 description is stored without any option encryption value for the WPA.

The workaround is to manually add the option encryption value
option encryption 'psk-mixed+tkip+ccmp'

So the final entry looks like this

config wifi-iface
option device 'radio2'
option ifname 'wlan2'
option mode 'sta'
option ssid 'XXXXXX'
option network 'wan'
option key 'XXXXXXXXXXXXXXXXX'
option encryption 'psk-mixed+tkip+ccmp' <--------------------Manually added


Aftre that the connection is succesful

Comments:

Sebkinne
2016/08/18 00:32
Thank you, this issue has been found and resolved in the upcoming firmware version 1.2.0.

Add Comment:

Please log in to comment.