Can't clear SSID Pool, remove Modules, can't save PineAP Settings

Device: NANO
Type: Bug
Status: Closed

Hi,

I'm on 1.0.5. and since today I got some problems:
Can't clear SSID Pool, I can clear but after refresh the list is not gone;
I can't remove Modules, he says he does but after plug off/in they not really gone.
I can't save PineAP Settings as a config default.

Tried several times plug it out and in and resets... Can someone explain it?

Comments:

846
2016/01/23 22:58
additional, I think filesystem is full, someone knows what's the best way to clean it up?

Filesystem Size Used Available Use% Mounted on
rootfs 2.3M 2.2M 52.0K 98% /
/dev/root 12.5M 12.5M 0 100% /rom
tmpfs 29.9M 100.0K 29.8M 0% /tmp
/dev/mtdblock3 2.3M 2.2M 52.0K 98% /overlay
overlayfs:/overlay 2.3M 2.2M 52.0K 98% /
tmpfs 512.0K 0 512.0K 0% /dev
846
2016/01/23 23:08
additional, I think filesystem is full, someone knows what's the best way to clean it up?

Filesystem Size Used Available Use% Mounted on
rootfs 2.3M 2.2M 52.0K 98% /
/dev/root 12.5M 12.5M 0 100% /rom
tmpfs 29.9M 100.0K 29.8M 0% /tmp
/dev/mtdblock3 2.3M 2.2M 52.0K 98% /overlay
overlayfs:/overlay 2.3M 2.2M 52.0K 98% /
tmpfs 512.0K 0 512.0K 0% /dev
Sebkinne
2016/01/23 23:48
That's what happens when you fill your FS to the max :(
We need to advertise the fact that an SD card is recommended.

The best way to fix this issue is by factory resetting your WiFi Pineapple NANO.


Best Regards,
Sebkinne
846
2016/01/24 10:21
Hi Sebkinne,

Factory resetting did the trick... thanks...

Best Regards

Add Comment:

Please log in to comment.